HOW TO USE

You will be amazed by how quick and easy it is to apply your French Kiss with the help of a little water. 

Step 1: Clean and dry skin. You want to make sure your skin is clean, dry and free of any oils or the tattoo will not adhere. If you have lotion or any products on (even from hours earlier), use a little soap and water or a cotton ball soaked in rubbing alcohol to clean the area. 

Step 2: Cut out the tattoo as close to the edge as possible (this is important later when you need to line it up). If you are applying a band that will be worn as a bracelet, anklet or arm band, trim the tattoo to size if it needs to be adjusted while the protective liner is still in place. 

Step 3: Once it is properly trimmed, remove the clear sheet. For best application, ask a friend to help position your Flash Tattoo so your skin does not twist or stretch. 

Step 4: Place the tattoo face down on your skin and hold a wet cloth against it for about 30 seconds. Peel the paper aside then pat gently with the wet cloth. Tada! Be sure not to twist or stretch skin until the tattoo has had time to set (at least 10 minutes). French Kisses look best after they have had an hour or two to set into the skin.